Encodeur en Quadrature Lynxmotion V2 (avec Câble)

LynxmotionUGS :RB-Lyn-929
Numéro du fabricant: QME-02

Prix  :
Prix en promotion $63.00

Expédition calculée à la caisse

Stock  :
En stock, 12 unités

Paiements et sécurité

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa Tabit

Vos informations de paiement sont traitées de manière sécurisée. Nous ne stockons pas les informations relatives aux cartes de crédit et n'avons pas accès à ces informations.

Description

Encodeur en quadrature avec deux signaux de sortie
Conçu spécifiquement pour le Moteur a Engrenages 6-12VDC 200rpm, 0.78Kg-cm (Avec Essieu Arrière) GHM-16 et le Moteur Engrenage Cylindrique 7.2VDC 291RPM 11oz-in (Avec Essieu Arrière) GHM-03
Se fixe sur l'arbre de sortie de la boîte d'engrenages
Le câble est compris
Le moteur et le support de montage ne sont pas compris

L'Encodeur en Quadrature Lynxmotion V2 (avec Câble) est conçu pour le Moteur à Engrenages 6-12VDC 200rpm, 0.78Kg-cm (Avec Essieu Arrière) GHM-16 et le Moteur Engrenage Cylindrique 7.2VDC 291RPM 11oz-in (Avec Essieu Arrière) GHM-03, vendus séparément. L'encodeur V1 d'origine a été interrompu et le produit de remplacement ne se fixe pas correctement sur le plastique autour de l'essieu arrière, c'est pourquoi une entretoise en lexan et du ruban adhésif sont compris.

  • Boîtier supérieur de l'encodeur en Quadrature de US Digital (se visse dans l'entretoise en lexan par le dessous)
  • Boîtier inférieur de l'encodeur en Quadrature de US Digital
  • PCB et disque d'encodeur de US Digital
  • Entretoise en lexan (veuillez retirer le plastique des deux côtés)
  • Deux vis de montage pour connecter la base inférieure au composant en lexan
  • Ruban adhésif en mousse avec support adhésif des deux côtés
  • Câble de connexion

Fichier PDF

  • Cycles par révolution : 100
  • Nombre de quadrature par révolution : 400
  • Fréquence : 30 kHz

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
0%
(0)
20%
(1)
0%
(0)
E
Ellis
Bon produit

J'ai le mien depuis environ 10 ans. C'était du plastique à l'époque. J'ai lu quelques critiques, donc s'il s'agissait de métal, c'était avant il y a 10 ans. J'ai dû mettre une petite goutte de colle à quelques endroits pour les tenir. Mais cela fonctionne comme il se doit.

E
Ellis
Fine product

Ive had mine for around 10 years. It was plastic then. I read a few reviews so if they was metal it was before 10 years ago. I did have to put a small drop of glue a couple spots to hold them. But it works as should.

T
Thomas
The first encoder I bought worked so well that I bought a second encoder

After assembling and installing the first encoder I decided to assemble and install a second encoder. I can't emphasize enough that the circular Lexan base must be flush to the back of the motor. That means notching the bottom of the base to clear the motor power terminal bosses and flattening the raised lettering on the back of the motor. If you do this your encoder will mount perfectly flat to the back of the motor. US Digital states that the encoder disk should stand off of the encoder detector by 0.070 in which is hard to accomplish without the alignment tool they provide in their kit. All I can say is place the encoder disk on a flat, hard surface, align the motor shaft with the hole in the disk, and with reasonable pressure press the motor shaft into the disk until it bottoms out on the hard surface. Now find a tool, like a nut driver, that can slide over the motor shaft and CAREFULLY begin to push the disk towards the encoder detector constantly checking the clearance. You might try to eyeball the correct spacing and be successful. I used a caliper, a magnifying glass, and came within 0.01 in of the correct spacing which worked for me. Take your time and you will prevail.

T
TCIII
A quality Lynxmotion motor encoder that is somewhat difficult to install

I received the US Digital quadrature motor encoder in the mail today and found that the installation instructions, on the Lynmotion website, are sorely lacking in relation to successfully installing the encoder on the back of the motor. I knew this already so it was no surprise. The spacer ring used to mount the encoder assembly on the back of the motor initially did not fit flush to the motor back surface due to the spacer ring sitting on top of the motor power terminal bosses. Filing clearance dimples in the bottom of the spacer ring edge solved that problem. The spacer ring is now gluing to the back of the motor and should be dry by tomorrow morning. I can then attach the encoder assembly to the mounting ring followed by the encoder wheel. US Digital usually supplies a spacer to correctly distance the encoder wheel above the encoder assembly, but was not included in the kit. Guess that I will have to wing it. Once assembly is complete I expect it will function correctly as all Lynxmotion products do.

A
Alexey
Worse than the first version

More difficult to assemble than the first version. Encoder disk is partially made from plastic, while the first version was fully metallic - seems like a downgrade. During assemble, the manual suggest to force screws into the plastic, as the result, the entire construction doesn't sit firmly - I could easily detach it by hand with a little force.

Estimation des frais de port

Vous aimerez aussi

1
Lynxmotion 12VDC 200rpm, 0.78Kg-cm GHM-16 w/ rear shaft
Lynxmotion Moteur a Engrenages 6-12VDC 200rpm, 0.78Kg-cm (Avec Essieu Arrière) GHM-16

UGS : RB-Hsi-05

Prix en promotion$32.28
Commentaires
En stock, 126 unités
1Sur demande
Lynxmotion 12V 20 rpm 167.88oz-in 1:99.5 Brushed DC Gear Motor w/ EncoderLynxmotion 12V 20 rpm 167.88oz-in 1:99.5 Brushed DC Gear Motor w/ Encoder
Lynxmotion Moteur CC à Brosse 12V, 20RPM 167.881oz-in, 1:99.5 avec Encodeur Lynxmotion

UGS : RB-Wtc-18

Prix en promotion$96.47
Commentaires
1Sur demande
DFRobot 12V Metal DC Geared Motor w/ Encoder (90:1, 122rpm, 38Kg.cm)DFRobot 12V Metal DC Geared Motor w/ Encoder (90:1, 122rpm, 38Kg.cm)
DFRobot DFRobot Moteur à engrenages DC en métal 12V avec encodeur (90:1, 122rpm, 38Kg.cm)

UGS : RB-Dfr-1395

Prix en promotion$42.65
Commentaires
1
12VDC 254RPM 14oz-in GHM-12 Spur Gear Head Motor
Lynxmotion Moteur à Engrenage Cylindrique 12VDC 254RPM 14oz-in GHM-12

UGS : RB-Hsi-06

Prix en promotion$41.84
Commentaires
En stock, 98 unités
1
Lynxmotion SES-V2 Conveyor HD Button & Encoder Mount Add-On
Lynxmotion Lynxmotion SES-V2 Convoyeur HD Supports pour boutons et encodeurs

UGS : RB-Lyn-1080

Prix en promotion$11.31
Commentaires
En stock, 3 unités
1
36mm 12V 170RPM Brushed DC Gear Motor w/ Encoder (1:51)36mm 12V 170RPM Brushed DC Gear Motor w/ Encoder (1:51)
Lynxmotion Moteur à engrenages CC brossé 36 mm 12 V 170 tr/min avec encodeur (1:51)

UGS : RB-2dm-02

Prix en promotion$44.10
Commentaires
En stock, 121 unités
1
Lynxmotion Aluminum A4WD1 Chassis
Lynxmotion Châssis Aluminium A4WD1 Lynxmotion

UGS : RB-Lyn-399

Prix en promotion$140.97
Commentaires
En stock, 4 unités
1
Lynxmotion Aluminum A4WD1 Rover Kit (w/ Encoders)Lynxmotion Aluminum A4WD1 Rover Kit (w/ Encoders)
Lynxmotion Robot en Kit 4WD1 Aluminium Avec Encodeurs Lynxmotion

UGS : RB-Lyn-654

Prix en promotion$553.85
Commentaires
En stock, 4 unités
1
Lynxmotion A4WD1 Autonomous Rover Kit - BotBoarduino
Lynxmotion Robot Autonome en Kit A4WD1 BotBoarduino Lynxmotion

UGS : RB-Lyn-478

Prix en promotion$614.12
Commentaires
En stock, 3 unités
1Sur demande
Pololu 99:1 Metal Gearmotor 25Dx69L mm MP 12V w/ 48 CPR EncoderPololu 99:1 Metal Gearmotor 25Dx69L mm MP 12V w/ 48 CPR Encoder
Pololu Pololu Motoréducteur Métallique 99:1 25Dx69L mm MP 12V avec Encodeur 48 CPR

UGS : RB-Pol-1434

Prix en promotion$67.57
Commentaires