65 N·m peak joint torque, 45 kg standing payload, 10 kg continuous walking load
Speed 0–3.0 m/s
Unitree L2 ultra-wide-angle LiDAR and HD camera for navigation and obstacle awareness
Standard 8,000 mAh battery, ~2 hours unloaded runtime, ~10 km range
Operational from -20°C to 50°C
UniStore application platform supported with continuous OTA updates
Delivery Schedule: Expected availability October 2026
The Unitree As2 AIR Quadruped Robot is the entry-level configuration of the Unitree As2 quadruped robot series, developed by Unitree Robotics as a compact, agile platform for inspection, patrol, and field mobility tasks. Weighing approximately 18 kg with its battery, it shares the same 12-DOF mechanical foundation as the broader As2 lineup, combining low-inertia inner-rotor PMSM motors with industrial-grade crossed roller bearings to achieve a standing payload capacity of up to 45 kg and a continuous walking load of approximately 10 kg. The robot operates at speeds between 0 and 3.0 m/s in standard use, handles slopes of up to 30 degrees, and climbs stairs up to 20 cm in height. Its compact form factor makes it well-suited for mixed indoor and outdoor environments where a larger quadruped would be impractical.
The As2 AIR equips a Unitree L2 ultra-wide-angle LiDAR alongside an HD camera, speaker, microphone, front lighting, and Wi-Fi 6 and Bluetooth 5.2 connectivity to support navigation, obstacle awareness, and basic autonomous operation. The standard 8,000 mAh battery delivers approximately 2 hours of unloaded continuous walking with a range of around 10 km, and over 1.5 hours when carrying a 10 kg payload. As an open AI robotics platform entry point, the As2 AIR supports the UniStore application platform and receives continuous OTA software updates, providing access to a growing ecosystem of applications for inspection, patrol, and field deployment use cases.
Why Buy From RobotShop
Authorized Distributor
Full manufacturer-backed warranty coverage and dedicated product support
Hassle-Free Delivery
Complete end-to-end logistics management, including customs clearance
Single Point of Contact
All pre-sales and post-sales support handled by our dedicated team
Documentation & Resources
Full access to detailed technical guides and a comprehensive knowledge base
Max Speed
3 m/s
Max Joint Torque
65 N·m
Battery Life
2+ hrs
Payload (Standing)
45 kg
Payload (Walking)
10 kg
Model Features
High-Torque Joint System
Low-inertia inner-rotor PMSM motors with industrial crossed roller bearings and dual encoders per joint deliver up to 65 N·m peak torque with precise, repeatable motion across all terrain types.
Runtime
The standard 8,000 mAh battery delivers approximately 2 hours of continuous unloaded walking over a range of around 10 km, with over 1.5 hours and approximately 7 km available when carrying a 10 kg payload.
Navigation & Perception
The Unitree L2 ultra-wide-angle LiDAR paired with an HD camera provides the spatial awareness needed for obstacle detection, route following, and stable autonomous locomotion across varied environments.
Use Cases & Application Scenarios
The As2 AIR brings legged mobility and LiDAR-equipped navigation to inspection, patrol, and field operations in a compact, lightweight platform accessible as an entry point into the As2 series.
Industrial Inspection & Facility Patrol
The As2 AIR is suited for autonomous patrol and inspection of indoor facilities such as warehouses, manufacturing floors, and substations. Its LiDAR-equipped navigation and HD camera allow it to cover complex indoor routes and provide situational awareness across varied lighting conditions without continuous operator input.
Research & Education
Universities, robotics labs, and AI research centers can use the As2 AIR as an accessible entry point into the As2 mechanical platform, taking advantage of its 12-DOF quadruped architecture and UniStore ecosystem to run and evaluate legged mobility applications without the overhead of higher-tier configurations.
Outdoor Navigation & Field Operations
With gradeability of up to 30 degrees, the ability to climb 20 cm stairs, and a range of approximately 10 km unloaded, the As2 AIR handles light outdoor terrain for use cases such as site walkthroughs, environmental monitoring, and field data collection.
Indoor Demos & Showcases
The As2 AIR's compact 18 kg form factor and agile 12-DOF locomotion make it an ideal platform for live demonstrations, exhibition deployments, and indoor showcases where a capable legged robot is needed without the overhead of a higher-tier configuration.
Unitree As2 AIR Quadruped Robot
Model: As2 AIR
•
Unitree As2 AIR Quadruped Robot
•
Standard Battery (8,000 mAh)
•
Standard Charger (50.4V 4A)
Package contents vary by configuration. Remote control is optional and not included. Charging Dock is not available for the AIR variant.
Unitree As2 AIR Quadruped Robot
Model: As2 AIR
Standing Height
•
457 mm
Folded (Lying Prone) Height
•
233 mm
Dimensions (Standing)
•
720 mm x 378 mm x 457 mm
Dimensions (Lying Prone)
•
776 mm x 378 mm x 233 mm
Weight (with Battery)
•
Approx. 18 kg
Values shown are from the manufacturer's reference.
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".