TMotor UAV Brushless Motor Antigravity MN5008 KV170
Offer high-temp resistant wire and high-quality bearing
Quadcopter of 4kg, 60-min flight time
Run smoothly, low cogging torque
Rated: IP35
Internal Resistance: 270 mΩ
The TMotor UAV Brushless Motor Antigravity MN5008 KV170 offers high-temp-resistant wire and a high-quality bearing, a quadcopter of 4 kg and 60 minutes of flight time.
Capture the beauty that belongs only to you. Size the sunshine and tranquility on windy days. Max. thrust up to 4.2 kg agile maneuverability from abundant power backup to handle fast speed and sudden break to target the classical moments.
Ideal assist in emergency rescue: Your safeguard in front of danger and disaster. Motor temperature after working with 754 W load for 10 mins is only 89 °C. Easy task accomplishment in high-temperature conditions.
Incomparable core: Imported silicone steel sheets of high magneto-conductivity and upgraded laminated technology in combination with optimized arc magnets design contributes to the fusion of efficiency and thrust. Logical multislot structure brings down the motor cogging torque for smooth operation and low noise.
Silicone steel sheet: 0.2 mm thickness Imported silicone steel sheets of high magneto-conductivity and upgraded laminated technology contribute to high efficiency.
1x TMotor UAV Brushless Motor Antigravity MN5008 KV170
Size
Motor: Φ 55.6 x 32 mm
Shaft Inner Diameter: 6 mm
Lead cable length: 80 mm
Idle Current (22 V): 0.4 A
Peak Current (180s): 15 A
Max. Power (180s): 720 W
Internal Resistance: 270 mΩ
Rated Voltage (Lipo): 6 - 12 S
ESC Recommendation: FLAME 60A 12S
Stator: Imported silicon steel sheet | Anti-rust treatment | 180 °C high temperature-resisting coatings
Magnet Level: 150 °C high-temperature resistance: Level E
Copper Wire: 180 °C high-temperature resistance: Level H
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".