Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C)
Description
- Dual Motor Controller: 5A, 6-18V
- R/C control with servo leads
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and over-current protection
- Lithium battery protection mode
The Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C) specifically optimized for use in radio controlled vehicles. It is suitable for small robots, cars and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots.
Out of the box, it can supply two DC brushed motors with up to 5A each. Peak currents of 10A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
Features
- Includes exponential control, autocalibration and built-in mixing.
- The operating mode is set with the onboard DIP switches.
- Synchronous regenerative motor driver
- Thermal and overcurrent protection
- Built in 5V BEC can provide power to a microcontroller or R/C receiver.
- Lithium cutoff mode allows safe operation with lithium ion / polymer packs
- Ultra-sonic switching frequency
- Silent operation.
- Dimension Engineering 2x5 R/C motor controller
- Mounting hardware (2 screws, 2 nuts)
- Quick start Guide
- Example R/C vehicle wiring diagram
- Size: 1.8" x 1.6 " x 0.5"
- 45 x 40 x 13 mm
- 5" (13cm) servo cables
Good product. Easy to hook up and does what it is supposed to do. A little pricey but worth it.
Bon produit. Facile à brancher et fait ce qu'il est censé faire. Un peu cher mais ça vaut le coup.
Bought to be put into one of Lesu Skid Steer. I love how it was simple/ small to install. Fits perfectly inside. Works perfectly as well. Enough to power the dual-motor with no issues. Overall would buy again if needed.
Acheté pour être mis dans l'un des Lesu Skid Steer. J'adore la façon dont il était simple / petit à installer. S'intègre parfaitement à l'intérieur. Fonctionne parfaitement aussi. Assez pour alimenter le double moteur sans problème. Dans l'ensemble, j'achèterais à nouveau si nécessaire.
It works well, gets very hot though. A lil tricky to figure out the dip switches.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".

