Raspberry Pi Camera Board Case w/ 1/4" Tripod Mount
Description
- Basic, classic
Raspberry Pi Camera Module V2 board enclosure (Module not included) - Black base and clear top
- Keep your Pi Camera safe and secure
- Works with Pi Camera v1 and v2
- Two slots on the side to strap it
- 1/4" Tripod mount on the back
The Raspberry Pi Camera Board Case w/ 1/4" Tripod Mount is made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your pocket, bookbag, or toolbox. It has an easy-to-access slim opening for your camera cable to extend out from the camera module. The camera board sits nicely in the base, latching to the four little pegs, and the lid fits snugly on top. There's also a tiny hole in the lid so not to distort the capturing of images.
Please note: the Pi Camera v2 (8 Megapixel) is just a bit thicker than the original, which might cause the camera to press against the case and cause blurry images, depending on how it is focused. The easiest way to fix is remove the sticky-rubber spacer that is between the camera module and PCB. Gently remove the camera module from the PCB, peel off the spacer, and replug the camera module.
- Size: 50.0 x 31.0 x 12.8 mm
- Weight: 7.5g / 0.3oz
The back panel fit good with camera. However, the front panel cannot be installed because it pushes on the camera which affect video quality
Le panneau arrière s'adapte bien à l'appareil photo. Cependant, le panneau avant ne peut pas être installé car il appuie sur la caméra, ce qui affecte la qualité vidéo
Great little enclosure that makes mounting a RPi camera trivial. Please not that I made the mistake of buying a Raspberry Pi 5MP camera board off eBay for $5. Not only was it FAKE (it isn't recognized properly in Raspbian), the lens opening in the enclosure doesn't align properly to the fake board. Just buy a real RPi camera board and this enclosure and you'll be set.
Super petite enceinte qui rend le montage d'une caméra RPi trivial. N'oubliez pas que j'ai commis l'erreur d'acheter un appareil photo Raspberry Pi 5MP hors eBay pour 5 $. Non seulement était-il FAUX (il n'est pas reconnu correctement dans Raspbian), mais l'ouverture de l'objectif dans le boîtier ne s'aligne pas correctement avec le faux tableau. Il suffit d'acheter une vraie carte de caméra RPi et cette enceinte et vous serez prêt.
Works Fine, when I first put my RPi v2 camera in, it was a real tight fit and the camera was out of Focus. Searched it online and it was an easy fix. Behind the camera on the circuit board is a foam disk stuck to the board. Simply disconnect the camera from the board and remove the foam disk, and re connect the camera, Problem solved.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".