Description
- PS2 Connector breakout board
- Connectors pre-soldered
- Compatible with Lynxmotion PS2 V3 wireless controller
- Holes compatible with Arduino and Lynxmotion Electronics
- Mounting hardware included
The Lynxmotion PS2 connector breakout board is intended to be used with the Lynxmotion PS2 V3 wireless remote control. Unlike the Lynxmotion V1.5 and V2 remotes, the V3 does not need a level shifter, so the pins are broken out one to one. Break-away tabs allow you to mount the board to Lynxmotion electronics (same hole spacing), while the other two holes allow you to mount the board to a normal Arduino. PS2 connector and 90 degree headers are pre-soldered. Note that this cannot be used with the Lynxmotion PS2 V1.5 or V2 wireless remote controls, nor has this been tested with non-Lynxmotion PS2 receivers.
Works as advertised. The pins are pre soldered so you need to replaced them (or straighten them) if a 90 degree set up isn't what you need (i.e. a breadboard) and is the only reason for 4 stars vs. 5.
Works Perfect, using it for a hexapod run off an Arduino nano. PLEASE consider making 3d models available for your products! Some of us model and 3d print or machine parts to match your parts. :) I spend a lot of time making my own models of your parts.
Fonctionne comme annoncé. Les broches sont pré-soudées, vous devez donc les remplacer (ou les redresser) si une configuration à 90 degrés ne vous convient pas (c’est-à-dire une planche à pain) et constitue la seule raison pour laquelle 4 étoiles opposent 5.
Fonctionne parfaitement, en l'utilisant pour un hexapode exécuté sur un Arduino nano. VEUILLEZ envisager de rendre des modèles 3D disponibles pour vos produits! Certains d’entre nous modélisons et imprimons en 3D ou usinent des pièces correspondant à vos pièces. :) Je passe beaucoup de temps à créer mes propres modèles de vos pièces.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".