Pololu LPS22DF Digital Barometer Sensor w/ Voltage Regulator
Description
- Pololu LPS22DF Digital Barometer Sensor w/ Integrated Voltage Regulator
- High-precision pressure sensing
- Altitude conversion capable
- Dual I²C/SPI communication
- Embedded temperature compensation
- User-friendly design for easy integration
The Pololu LPS22DF Digital Barometer Sensor w/ Voltage Regulator is designed to measure atmospheric pressures ranging from 260 mbar to 1260 mbar with a high degree of accuracy, achieving absolute accuracy down to ±0.5 mbar. It is capable of converting pressure measurements to altitudes, making it suitable for a variety of applications. The sensor is equipped with both I²C/I3C and SPI interfaces for communication.
This compact carrier board for the ST LPS22DF MEMS absolute pressure sensor is designed to facilitate the use of the sensor for students and hobbyists. It includes a 3 V linear regulator and level shifters to accommodate a wide input voltage range, ensuring compatibility with various microcontroller voltages. The board comes fully populated with surface-mounted components, including the LPS22DF sensor itself.

The LPS22DF sensor is notable for its embedded temperature compensation and a host of configurable options. These options include selectable averaging, multiple output data rates, FIFO operating modes, and a programmable external interrupt signal. The sensor's pressure output is characterized by low RMS noise and high accuracy, and it supports data output for both pressure and temperature, which can be utilized for altimetry purposes.
In comparison to its predecessor, the LPS22DF offers enhanced accuracy, reduced noise, and a higher maximum output rate. The flexibility in configuring averaging allows for optimization between power consumption and noise reduction. Although pin-compatible with previous pressure sensor carriers, the LPS22DF has different configuration registers, necessitating code adjustments for compatibility.
The carrier board's low-dropout linear voltage regulator ensures the sensor is adequately powered, and the integrated level-shifting circuit simplifies interfacing with different logic voltage levels. The board's design, with standard 0.1" pin spacing, is intended to be user-friendly, allowing for easy integration into standard solderless breadboards and perfboards.
Please note that it is recommended to thoroughly review the LPS22DF datasheet before using this product. The sensor operates at voltages below 3.6 V, which may require special consideration when interfacing with microcontrollers operating at higher voltages.
- 1x Pololu LPS22DF Digital Barometer Sensor w/ Voltage Regulator
- 1x 1x8 strip of 0.1-inch header pins
- 1x 1x8 strip of 0.1-inch right-angle header pins
The board includes one mounting hole compatible with #2 and M2 screws (screws not included). You have the option to solder the header strip of your choice to the board for use with custom cables or solderless breadboards, or you can solder wires directly to the board for more compact installations.

- 0.4 x 0.8 x 0.1 inch (L x W x H)
- Operating voltage: 1.8 V to 5 V
- Supply current: 1 mA
- Output format (I²C/SPI): 24-bit pressure reading (4096 LSb/Mbar)
- Sensitivity range: 260 Mbar to 1260 Mbar (26 kPa to 126 kPa)
- Weight without header pins: 0.5 g
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".