Pimoroni MAX30101 Breakout Heart Rate, Oximeter, Smoke Sensor
Description
- Pimoroni MAX30101 Breakout
- Measures heart rate, oxygen saturation, and smoke detection
- Compatible with Raspberry Pi and Arduino
- Employs photoplethysmography for accurate heartbeat detection
- Equipped with green, red, and infrared LEDs and photodetectors
The Pimoroni MAX30101 Breakout Heart Rate, Oximeter, Smoke Sensor is a sophisticated sensor designed to measure heart rate, and oxygen saturation, and detect smoke or particles in the air. This versatile device can be used to visualize your heartbeat or to synchronize LEDs or lights with your heart rhythm. It is compatible with both Raspberry Pi and Arduino.
The sensor is equipped with three LEDs - green, red, infrared, and photodetectors. These components work together to measure the amount of light reflected back to the sensor. By employing a technique known as photoplethysmography (PPG), the sensor can detect changes in skin color with each heartbeat when pressed against the fingertip.
In addition to its health monitoring capabilities, the MAX30101 can also detect airborne particles such as smoke. This is achieved by measuring the amount of light reflected back to the sensor by these particles.
The sensor is also compatible with the Breakout Garden HAT, which simplifies the use of breakouts by allowing the user to easily insert the sensor into one of the six slots. For those using the MAX30101 with the Breakout Garden for heart rate measurement, it is recommended to use the Breakout Garden Extender Kits along with female-to-female jumper jerky. This combination facilitates more reliable heartbeat readings.
Important: The Pimoroni MAX30101 Breakout Heart Rate, Oximeter, Smoke Sensor, and the code in the Python library, should not be used for medical diagnosis, as a real smoke or fire detector, or in life-critical situations. It is intended for fun or novelty use only.
- 1x Pimoroni MAX30101 Breakout
- 1x 1x5 Male Header
- 1x 1x5 Female Right-Angle Header
- 19 x 19 x 3.2 mm (L x W x H)
- Green, red, and infrared LEDs
- Photodetectors
- Ambient light rejection
- Temperature sensor
- I2C interface (address 0x57)
- Compatible with 3.3 or 5 V
- Reverse polarity protection
- Compatible with Raspberry Pi computers and Arduino
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".