Opt Lasers Laser Diode Driver LPLDD-5A-35V-TP-H
Description
- Opt Lasers Laser Diode Driver LPLDD-5A-35V-TP-H
- Compact and versatile with a single channel and 3-35 V input
- Features adjustable thermal protection to prevent overheating
- Powers any laser diode up to a capacity of 5 W
- Offers multiple control options and current output options
- Boasts high bandwidth, short rise and fall time
The Opt Lasers Laser Diode Driver LPLDD-5A-35V-TP-H is a compact and versatile laser diode driver that features a single channel and a 3-35 V input. This device offers a variety of current options and flexible control modes, such as proportional, pulse-width modulation (PWM), or a combination of both.
One of the key features of this laser diode driver is its adjustable thermal protection, which is designed to prevent the laser diode from overheating. This driver is capable of powering any laser diode available in the market up to a capacity of 5 W.
The device boasts a wide input voltage range, multiple control options, an impressive noise figure, high bandwidth, and short rise and fall time. It also offers a variety of current output options. The thermal protection system of the driver, designed to work with an NTC 10kΩ, β=3950 thermistor, safeguards the laser diode from overheating. The operating temperature of the protection can be set within a range of 10 - 50 °C using a trimmer.
- 1x Opt Lasers Laser Diode Driver LPLDD-5A-35V-TP-H
- 50 x 33 x 26.3 cm
- Max Output Current: 5 A
- Max Power Dissipation: 15 W
- Modulation Input Voltage Range: 0 - 5 V
- Modulation Type: Analog / TTL
- Pre-Set Current Setting: 0 A
- Softstart Time: 1 ms
- Temperature Sensor Type: 10k NTC thermistor
- Rise Time: less than 1µs
- Fall Time: less than 1µs
- Noise and Ripple (RMS): 4 mA
- Vcc Logic: 7.5 – 35 V
- Vcc Laser Diode: 3 – 35 V
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".