Opt Lasers Laser Diode Driver LPLDD-1,5A-35V-TP-H
Description
- Opt Lasers Laser Diode Driver LPLDD-1,5A-35V-TP-H
- Compact and versatile with a single channel and 3-35 V input
- Offers a variety of current options and flexible control modes
- Equipped with an adjustable thermal protection system
- Powers a wide range of laser diodes with a max output of 10 A
- Features a broad input voltage range and impressive noise figure
The Opt Lasers Laser Diode Driver LPLDD-1,5A-35V-TP-H is a compact and versatile laser diode driver, equipped with a single channel and a 3-35 V input. This device offers a variety of current options and flexible control modes, such as proportional, PWM, or combined. It is designed with an adjustable thermal protection system to safeguard the laser diode from overheating.
The driver is capable of powering a wide range of laser diodes, with a maximum current output of up to 10 A. It can modulate the current flowing through the diode with a frequency of up to 100 kHz. This device can power virtually any laser diode available in the market, including those with wavelengths of 405 nm, 445 nm, 520 nm, 638 nm, 650 nm, 808 nm, and 980 nm.
The Opt Lasers LPLDD-1,5A-35V-TP-H boasts a broad input voltage range, multiple control options, an impressive noise figure, high bandwidth, short rise and fall time, and various current output options. The thermal protection system, designed to work with an NTC 10kΩ, β=3950 thermistor, ensures the laser diode is protected from overheating. The operating temperature of the protection system can be adjusted between 10 - 50 °C using a trimmer.
- 1x Opt Lasers Laser Diode Driver LPLDD-1,5A-35V-TP-H
- 50 x 33 x 26.3 cm
- Max Output Current: 1.5 A
- Max Power Dissipation: 15 W
- Modulation Input Voltage Range: 0 - 5 V
- Modulation Type: Analog / TTL
- Pre-Set Current Setting: 0 A
- Softstart Time: 1 ms
- Temperature Sensor Type: 10k NTC thermistor
- Rise Time: less than 1µs
- Fall Time: less than 1µs
- Noise and Ripple (RMS): 0.7 mA
- Vcc Logic: 7.5 – 35.0 V
- Vcc Laser Diode: 3 – 35.0 V
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".