Featuring a large diameter and multiple pole pairs
Operating temperature range from -40 to 80 °C
Communication: RS-485/CAN BUS
The RMD-L-9015-35T BLDC CAN Bus Servo offers a mechatronics design that integrates a built-in motor drive and position sensor, featuring a large diameter and multiple pole pairs for enhanced torque in compact applications.
It offers a range of product models with diameters from 20mm to 140mm and torque from 0.02 to 5N·m. The system supports RMD Assistant for easy setup, accommodates a wide voltage input range with customizable windings, and operates in environments from -40 °C to 80 °C.
It supports multiple communication methods, including RS485 and CAN Bus, and includes standard industry closed-loop control modes (torque, speed, position) with customizable functions. The motor can achieve speeds up to 4000 RPM and incorporates multiple protection features against over-temperature, over-voltage, and overcurrent. It is ideal for applications requiring precise low-speed control and high torque, such as service robots, laser radars, gimbals, and laboratory test equipment.
1x RMD-L-9015-35T BLDC CAN Bus Servo
Rated voltage: 24 V
Rated Current: 7.03/3.34 A
Rated torque: 1.64/1.67 N.M
Rated speed: 780/290 rpm
Maximum no-load speed [Max Speed]: 1085/500 rpm
Max Instant Torque: 3.4/5 N.M
Maximum instantaneous current: 15.00/11.00 A
Line Resistance: 0.35/1.51 Oh
Wiring method [Wire Connect]: AND
Phase to Phase Inductance: 0.65/1.05 mH
Speed Constant: 45/21rpm/V
Torque Constant: 0.20/0.45N.M/A
Rotor Inertia: 3271 gcm2
Number of Pole Pairs: 14
Working Temperature Range: -20 °C ~ 80 °C
Maximum demagnetization temperature [Max Demagnetize Temperature]: 120 °C
Matched Driver: MC200
Driver input voltage range [Input Voltage]: 8 ~ 36 V
Driver current range [Current]: Normal: 8A Instant: 15 A
Rated power: 200 IN
Communication: RS-485/CAN BUS
Encoder accuracy: 14-bit magnetic encoder
Baud Rate: 9600, 19200, 57600, 115200 (default)
Communication frequency: RS485 at 115200 BPS:500 Hz; CAN BUS at 1MBPS:2 KHz
Control frequency: Torque open loop: 24kHz / Speed loop: 8kHz / Position loop: 4 KHz
Control mode [Control frequency]: Torque open loop / speed loop / position loop
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".