Mini DFRobotShop Rover Mobile Smartphone Development Kit
Description
- Small tracked kit for Smartphone experimentation
- Includes Arduino Uno, shield and Bluetooth module
- Frame made out of laser-cut Lexan parts and aluminum
- Comes with the DFRobotShop Rover Mobile Robot Shield
- Includes LiPo battery and onboard charger
- Cell phone can tilt 90 degrees
- Please verify the polarity of the connector before using this battery as it may differ from the image
The Mini DFRobotShop Rover Mobile Smartphone Development Kit is a small, tracked platform which provides all of the parts necessary to experiment with Arduino-based programming, mobile robots and smart phones. In order to accommodate as many smart phones as possible, the phone is mounted to the robot by adhering it to a silicon anti-slip mat*. Smartphone not included.
The frame is made out of durable laser-cut Lexan parts and aluminum brackets. The drive system is comprised of the Tamiya Twin-Motor Gear Box (must be assembled in configuration A) and a Tamiya Track and Wheel Set . The cell phone is mounted to a servo and bracket which allows the phone to be angled horizontally (0 degrees) to vertically (90 degrees).

No sample apps are available at this time, though should you develop one, we encourage you to submit the app for resale via the Software & APPs . Possible projects include:
- Adapt an image / object / face recognition app to follow motion
- Create a telepresence robot
- Use your cell phone as the “brain” of an autonomous robot
- Experiment with Arduino programming
- Using a normal IR remote control to operate the robot
The DFRobotShop Rover Shield is the ideal “all in one” shield for small, Arduino-based mobile robot development. The shield allows you to power your Arduino using a 3.7V LiPo battery (also included with this kit) and even has a 3.7V LiPo charger onboard, allowing you to charge the battery via USB. The onboard L298P H-bridge (dual brushed DC motor controller) is perfect for controlling two small, low voltage gear motors and allows for full control over speed and direction. Additional features include a universal IR receiver, XBee headers and analog pins broken out (for easy connection to sensors).
* We strongly suggest that your phone use a rubber protective case in the event that the phone falls. Additional mounting suggestion would be to permanently glue (using epoxy) an inexpensive smart phone case (made for your phone) to the bracket.
Note: Due to the requirements of shipping these batteries and restrictions from shipping companies, only two batteries can be shipped together at one time. If more than two batteries are added to your cart you will be unable to complete your order. We apologize for any inconvenience this may cause.
- Arduino Uno microcontroller
- Mobile base (frame, motors, tracks, hardware)
- 3.7V LiPo battery (charging via LiPo charger built into shield)
- DFRobotShop Rover Mobile Robot Shield
- Dual DC motor controller
- Onboard voltage regulator
- 3.7V LiPo battery charger (via micro USB connector)
- XBee headers
- 38Khz Universal IR receiver (~10m unobstructed range)
- On/Off switch & reset button
- 3-pin analog headers (signal / 5V / GND)
- Bluetooth module
- Servo motor
- Tilt system (brackets, hardware)
- Width: 10.8cm
- Length: 11.8cm
- Height: 19.7cm
- There is a 36mm wide x 7mm high gap in the top support plate for a 3.7V, 1000mAh LiPo battery. Foam is included so the battery is a “friction fit”
- Front mounting slots are for general use.
- Cell phone mounting surface: 6cm x 12cm
La perfection.
Perfection.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".