M5Stack NanoH2 Dev Kit (ESP32-H2, IEEE 802.15.4, Zigbee, Thread, Matter)
Ultra-compact IoT development board for lightweight scenarios
Supports Zigbee, Thread, and Matter protocols for versatility
Ensures security with secure boot and Flash encryption
Offers extensive hardware expansion via Grove interface
Ideal for smart home, industrial control, low-power communication
The M5Stack NanoH2 Dev Kit (ESP32-H2) is an ultra-compact IoT development board designed for lightweight IoT scenarios. It is powered by the ESP32-H2FH4S SoC and incorporates secure boot and Flash encryption for enhanced security. The device supports IEEE 802.15.4 wireless communication and is compatible with Zigbee, Thread, and Matter protocols. It is ideal for smart home applications, industrial control, and low-power wireless communication nodes, offering developers extensive hardware expansion capabilities through its Grove interface.
1x M5Stack NanoH2 Dev Kit (ESP32-H2)
23.5 x 12.0 x 9.5 mm
SoC: ESP32-H2FH4S with RISC-V 32-bit single-core, up to 96 MHz
Flash Memory: 4MB
RGB LED: WS2812
Communication Protocol: IEEE 802.15.4, including Zigbee 3.0, Thread 1.4, and Matter
OpenThread Range: Maximum distance of 225 meters with a packet loss rate of 0%
IR Remote Parameters: IR transmission distance at 0° is 395 cm, at 45° is 70 cm, and at 90° is 10 cm
Grove Maximum Load: DC 4.43V at 2A for 5 minutes at 25.2°C
Operating Power: IEEE 802.15.4 wireless TX at DC 5V and 18.68mA, RX at DC 5V and 18.82mA; IR remote at DC 5V and 6.80mA; RGB (white) at DC 5V and 10.79mA; LED at DC 5V and 12.34mA at maximum brightness
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".