Lynxmotion Pan and Tilt Kit (No Servos)
Description
- Pan and Tilt assembly for horizontal surface mount
- Made using of two manufacturer servo brackets
- Perfect for your small remote piloted robot
- Includes Hardware
Our selection of standard brackets can use most standard size Hitec analog or digital servos. The HS-3xx, 4xx, 5xx, 6xx, 54xx, 56xx, and 59xx servos are verified to fit. Note that servos from other manufacturers are not guaranteed (nor likely) to work. With the new ultra powerful digital servos it is now possible to control larger, more complex assemblies than ever before.
- 1 x Aluminum Multi-Purpose Servo Bracket Single
- 1 x Aluminum ''C'' Servo Bracket Single
- Hardware (Screws and Nuts)
Pictures
PDF File
Website
I bought this kit to be used with the Hitec HS-311 servos. The summary of the product says it was verified to fit with the HS-3xx series. The first servo connection was just fine. But the holes of the second servo did not align with the holes of the multipurpose servo bracket, so I could not use the push-in fasteners even with two people trying to somehow forcefully align the holes. I happened to have an HS-422 that I was planning to use for another project and, sure enough, that servo fit perfectly since it is slightly longer. It's frustrating because I purchased HS-311s to be used with this kit and instead now I have to hope I can use it for the other project instead of the HS-422 as I had planned.
Very elegant way to make a Pan/Tilt system.
Well made, simple to build, good fit for the suggested servos and looks tough enough for most jobs involving servos of this size. Quick delivery from Robotshop too.
J'ai acheté ce kit pour être utilisé avec les servos Hitec HS-311. Le résumé du produit indique qu'il a été vérifié qu'il est compatible avec la série HS-3xx. La première connexion servo était très bien. Mais les trous du second servo ne s'alignaient pas avec ceux du support de servo polyvalent. Je ne pouvais donc pas utiliser les attaches à pression, même lorsque deux personnes essayaient de les aligner avec force. J'avais un HS-422 que je prévoyais utiliser pour un autre projet et, ce qui est certain, ce servo convient parfaitement car il est légèrement plus long. C'est frustrant parce que j'ai acheté des HS-311 pour être utilisés avec ce kit. Au lieu de cela, je dois maintenant espérer pouvoir l'utiliser pour l'autre projet plutôt que pour le HS-422 comme je l'avais prévu.
Le système en lui-même n'est pas trop mal, sans pour autant être très rigide, ce n'est pas fait pour supporter de "fortes" charges (et vous aurez certainement à redresser un peu les pattes de fixation pour le servo qui ne sont pas très perpendiculaires), mais la qualité de la quincaillerie laisse vraiment à désirer. Les "rivets plastiques" ne tiennent rien du tout et ça bouge dans tous les sens, et la vis de pivot à l'arrière est d'une qualité médiocre : n'essayez pas de la dévisser une fois en place, l'empreinte hexagonale minuscule va foirer ! Pour faire bien, vous aurez besoin de 5 vis M3x10 et écrous autobloquants, et une rondelle M3 pour le pivot arrière. La rondelle permet d'utiliser les 4 supports de servo souples (livrés avec le servo) pour un meilleur maintient, la rondelle plastique fournie avec est trop épaisse. Et la notice de montage n'est dispo qu'en ligne, en anglais. Un petit schéma de montage en 3D sur la feuille livrée avec aurait été la bienvenue (le montage n'est pas bien compliqué, mais quand même). Pour 10€, ça fait un peu cher.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".