Payments and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
1x Molex 200mm wire harness
1x Rear Hinge / Hinge base / Hinge shaft
3x M3 Nuts
3x M2.5x5 screws
1x Socket set screw
Length: 57.5 mm
Width: 29.9 mm
Height: 15 mm (excluding rod end tip and rear hinge)
Weight: 41 g
Microcontroller: 32 bit ARM Core with 4096 Resolution A/D Converter
Position Sensor: 10 kOhms Linear Potentiometer
Motor: Core DC
Stroke: 26 mm (Extendable to 29 mm)
Positional Accuracy: 0.03 mm (30 um) Unidirectional
Input Voltage: 12 V
Rated Load: 12 N
Max Applicable Load: 24 N (at 20% Duty Rate)
Speed: 12 mm/sec (at No Load)
Max Duty Rate: 50%
Gear: Engineering Plastic Gears
Gear Ratio: 10:1
Rod: Engineering Plastic Rod
Mechanical Backlash: 0.03 mm (30 um)
Current Consumption: 140 mA at Rated, 30 mA at Idle
Audible Noise: 50 dB at 1 m
Data Communication & Protocol: TTL/IR Robot Open Protocol
PWM Pulse: 900 s (Retracted), 1500 s (Center), 2100 s (Extended)
LED Indication: 7 Error Indications (Overload, Checksum, Range, Overheat, Stroke Limit, Input Voltage, Instruction Error)
Parameter Setting: Programmable (More than 50 Operating and Setting Parameters)
Ingress Protection: IP 54 (Dust & Water Tight)
Operating Temp: 10 degrees C 60 degrees C
Wire Harness: Molex to Molex Type (Molex 50 37 5033, 3 Pins) / 200 mm Length, 0.08 60 (22 AWG)