Payments and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
"[Standard Accessories]
- 4pin Molex to Molex 200mm wire harness 1pc
- 5 Pin Molex 200mm Expansion I/O cable 1pc
- Rear Hinge / Hinge base / Hinge shaft 1pc
- M3 Nuts 3pcs
- M2.5x6 screws 3pcs
- Socket set screw 1pc
- Rod-end tip(eye bolt) 1pc
"
"- Dimension : 57.5(L)x23(W)x40.6(H)mm
(excluding rod-end tip and rear hinge)
- Weight : 65.5g"
"- Microcontroller: 32bit ARM Core. 4096 Resolution A/D converter
- Position Sensor: 10kΩ linear potentiometer
- Motor : Coreless DC
- Stroke: 27mm (Extendable to 30mm)
- Positional Accuracy: 0.03mm (30um) - Unidirectional
- Current Accuracy : ±15% at Over 50mA
- Input Voltage: 12V
- Rated Load : 20N
- Max applicable load : 40N (at 20% duty rate)
- Stall force at Current (1.6A / 800mA / 200mA) : 90N / 58N / 23N
- Speed : 117mm/sec (at no load)
- Max Duty rate : 50%
- Gear : Engineering plastic gears
- Gear Ratio : 10:1
- Rod : Metal Alloy Rod
- Mechanical Backlash: 0.03mm (30um)
- Current consumption : 400mA(rated), 30mA(Idle), 1.6A(Stall Max), 0.8A(Stall default)
- Audible noise : 50db at 1m
- Data Communication & Protocol : RS-485 / MODBUS RTU Protocol
- Expansion I/O : 4 Ports (Function : Switch, JOG, Action Enable, Force Off, PAUSE, STOP, RESTART, Alarm OUT)
- LED Indication : 2 Error Indications (Input voltage, Overload)
- Parameter Setting: Programmable (more than 50 Operating and Setting Parameters)
- Ingress Protection: IP-54 (Dust & Water Tight)
- Operating Temp: -10~60C
- Wire harness : Molex to Molex Type (Molex 0510650400, 4pins) / 200mm length, 0.08×60(22AWG) / I/O Port Wire harness : Molex 510210500, 5pins / 200mm length, 0.16 x 7 (26AWG)"