Genkinno P1 Intelligent Cordless Pool Cleaner Robot
Description
- Genkinno P1 Intelligent Cordless Pool Cleaner Robot
- Easily cleans large pools of up to 150 sqm
- Can be controlled with intuitive remote controller
- Features a sleek and compact cordless design
- Automatically parks in a convenient place
- Built with powerful and efficient brushless motors
- Designed for Above Ground pools and Flat Inground Pools
- Runs on a rechargeable 9000 mAh battery
The Genkinno P1 Intelligent Cordless Pool Cleaner Robot is intelligent and powerful with a sleek and compact cordless design. With Genkinno P1, you can now spend less time cleaning your pool and more time actually enjoying it.
Genkinno P1, easily cleans large pools of up to 150 sqm in size. Most swimming pools are roughly 50 sqm, which means the Genkinno P1 can cover it approximately 11 times over.

Compact & Sleek Design: Built with power and efficient brushless motors, Genkinno P1 easily handles all types of debris, small rocks, and leaves are handled effortlessly.
Safe for Pool Walls: The Genkinno P1 pool cleaner adopts an anti-collision strip design to ensure your swimming pool walls are not damaged in any way during use.

Intelligent Path Planning: Using an intelligent algorithm along with an inertial navigation and odometer system, Genkinno P1 cleans according to the smartest and most efficient route.
Efficient-Water-Drive System: This innovative design requires just a third of the power that similar products use while achieving the same suction power and efficiency. And it doesn’t only work on flat surfaces, Genkinno P1 can handle slopes up to 15 degrees.

Fast Charging, 4-Hour Use: It takes just under three hours to fully charge the Genkinno P1 thanks to its safe fast-charge technology. Once fully charged, enjoy up to four hours of use, which is enough to clean most pools several times over.
Suction Booster: When encountering larger pieces of debris, it will instantly increase suction power.

Powerful Cleaning: Equipped with efficient brushless motors (max 100W), the cordless pool vacuum can easily handle slopes up to 15 degrees, making it more adaptable to different pool shapes and designs.
Auto Parking: Once the Genkinno P1 is done cleaning, or the battery is low, it will park itself in a convenient place automatically so you can easily remove it from the pool via the floating cable.
FAQ:
Q: Should I turn on the robotic pool cleaner before putting it into the pool?
A: Yes. Power the robotic pool vacuum on before putting it into the pool.
Q: Can I turn on the cordless automatic pool cleaner while it’s charging?
A: No. Before charging, ensure the pool cleaners for inground pools is off and its charging port is clean and dry.
Q: Does the robotic pool cleaner require a remote controller to operate it?
A: No. Once the pool cleaners for inground pools is turned on, the default mode is auto mode, in which the robot will operate automatically and clean the swimming pool.
Q: Will the automatic pool vacuum still work if I have steps that go to the bottom of the pool
A: Yes, when the pool cleaner vacuum reaches a pool wall, ladder, or steps, it will turn around and go in a different direction.

- 1x P1 Robotic Pool Cleaner
- 1x Remote Controller
- 1x Water Filter Tank
- 1x Filter
- 1x Charger
- 1x User Manual
Size
- 415 x 276 x 200 mm
- Maximum Pool size: 150 sqm / 1614 sqft
- Max Suction Power: 100 W (under auto mode)
- Water-Drive System: Brushless Motor and Customized Propeller
- Remote Control: Yes (Batteries not included)
- RC Range: Up to 300 m
- RC Frequency: 2.4G
- Runtime: Max 4 hours
- Charging Time: 2-3 hours
- Battery: 9000 mAh
- Weight: 3.5 kg
- Water Tank: Independent
- Cleaning Coverage: Floor
- Smart Path Planning: Yes
- Efficient-Water-Drive System: Yes
- Suction Booster: Yes
- Auto Parking: Yes
- Precision Control: Yes
- Fast Charging: Yes
I was excited to get the robot at the very beginning. After charging and calibrating, I put the robot into my pool, composed of shallow water and deep water connected by a slope. The robot can't go up the slope although the slope is not steep at all. In my pool, the liner is old and there are some small folds in the bottom. When the robot touches those folds, it just turns around and can't overcome them. These two phenomena make the robot completely useless. Therefore, I have to seek a return and refund. Nevertheless, the process of refund by Robotshop is so far quite smooth and simple.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".