Full-Size Bare Breadboard (830 Tie Point)
Description
- Total of 830 tie in points
- All pins are spaced by a standard 0.1"
- Two sets of five columns are separated by about 0.3"
- Perfect for straddling a DIP package over
The Full-Size Bare Breadboard (830 Tie Point) is a full size solderless breadboard with 2 power buses, 10 columns, and 63 rows - with a total of 830 tie in points. The board accepts wire sizes in the range of 20-29AWG.
- 6.5 x 2.1 x 0.38" (165.1 x 54.29 x 9.68mm)
I bought 3 of these and I'm having a lot of problems with any kind of analog signal, or board you have to push into the breadboard. It works with 4 pin grove devices. But as soon as you place an LCD, or an analog signal, this gets wonky. I tried 2 out of 3 bread boards and they do not truely work. But when I switch to my old original board everything works again. Trying the 3rd one now. This product should not be Sold Here.
La carte fait ce qu'elle dit, mais il est difficile d'insérer des broches dans les points d'attache. Si vous souhaitez mettre une carte de dérivation ou un micro-contrôleur avec beaucoup d'en-têtes de broches sur la carte, c'est presque impossible. J'ai pu aider à résoudre ce problème en insérant de longs ensembles de broches d'en-tête dans les attaches à l'avance et en les laissant pendant un jour ou deux, cela a mieux ouvert les trous et facilité l'insertion de composants avec un grand nombre de broches après avoir retiré les en-têtes, lors de la tentative de mise en place de nouveaux composants.
connections are loose
The board does what it says, but it's difficult to insert pins into the tie points. If you want to put any breakout board or micro-controller with lots of pin headers onto the board, it is nearly impossible. I've been able to help fix this by inserting long sets of header pins into the tie ins ahead of time and leaving them for a day or two, this has opened up the holes better and made it easier to insert components with large numbers of pins after removing the headers, when trying to put new components in.
C'est une planche de prototypage avec insertions précises et uniformes (contrairement à certaines autres où il faut parfois se battre un peu avec des efforts d'insertion variable selon le trou d'insertion utilisé. Les numéros de colonne sont bien alignés avec les trous. Qualité supérieure.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".