The FeeTech 6V 2.3kg Dual Axis Serial Bus Servo is a 6V 2.3kg Dual axis serial bus servo that adopts a plastic case metal gearbox core motor Feetech self-researched and developed TTL control board high-quality potentiometer 25T output shaft.
The stall torque is 2.3 kg.cm effective control angle is 300° with servo mode and continuous motor working mode feedback position, speed, voltage, temperature, and load parameters, so as to achieve overload protection. It is suitable for teaching maker robot joints and other small torque transmission applications.
1x FeeTech 6V 2.3kg Dual Axis Serial Bus Servo
Size
23.2 x 12 x 25.5 mm (L x W x H)
Connector Wire: 15 cm
Gear Type: Copper + Steel
Limit angle: No limit
Bearing: No Ball bearings
Horn gear spline: 20T / OD 3.95 mm
Horn Type: Plastic, POM
Case: PC
Motor: Core motor
Operating Voltage Range: 4.8 - 7.4 V
No-load speed: 0.1 sec/60° (100 RPM) at 6 V
Running current (at no-load): 150 mA at 6 V
Peak stall torque: 2.3 kg.cm at 6 V
Rated torque: 0.7 kg.cm at 6 V
Stall current: 1.0 A at 6 V
Command signal: Digital Packet
Protocol Type: Half duplex Asynchronous Serial Communication