Description
- Ezo-Pump kit from Atlas Scientific
- Includes a peristaltic pump with controller, a pump tube & connector, a power supply, etc.
- Also comes with a data cable and a 10ml graduated cylinder
- Can be used to dispense liquids with a +/-1% accuracy
- Supplied Tubing: 61cm
- Tubing Data Protocol: UART & I2C
The EZO-PMP Pump Kit is a small peristaltic dosing pump and serial controller with all the parts needed to set up a nice home lab environment. The EZO-PMP inside each kit is a small, intelligently designed peristaltic pump that can be used to dispense liquids with a +/-1% accuracy (with calibration). With four modes of operation — continuous and volumetric dispensing, constant flow rate and dose over time — this embedded dosing pump kit is perfect for repeatable and reliable measurements.
The pump can simply connect to any TTL UART (such as an FTDI USB bridge or an Arduino RX/TX line) or I2C device. It is equipped with an easy-to-read RGB LED with multiple color codes to help define any situation the EZO-PMP is in. Each EXO-PMP runs at 3.3V–-5V for logic and 12V–24V for the motor and has plenty of example code for multiple formats to get you up and running in no time!
- Flow Rate: 0.5ml to 105ml/mins
- Accuracy: +/- 1%
- Modes of Operation: Continuous Dispensing, Volume Dispensing, Constant Flow Rate, Dose Over Time
- Calibration: Single Point
- Supplied Tubing: 61cm
- Tubing Size: Any 5mm O.D. Tubing
- Data Protocol: UART & I2C
- Default I2C Address: 103 (0x67)
- Operating Voltage: 3.3V–5V (Logic), 12V–24V (Motor)
- Pump Head: 2m
- Data Format: ASCII
Very well documented. Contains everything you need to get started. No soldering required. Tested on Arduino UNO and Raspberry Pi 4 UART. Despite difficult conditions, shipping and handling was very fast.
Très bien documenté. Contient tout ce dont vous avez besoin pour commencer. Aucune soudure requise. Testé sur Arduino UNO et Raspberry Pi 4 UART. Malgré des conditions difficiles, l'expédition et la manutention ont été très rapides.
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".

