Enhance dScript functionality with extra inputs and relays
Control via a single RS485 serial port
Handle up to 16Amp at 24VDC or 250VAC
Configure easily through the dSx configuration page
Compatible with multiple dScript models
The Devantech DSX42L - dScript Expansion Module is an advanced accessory designed to enhance the functionality of dScript modules by providing additional low voltage DC inputs and two extra relays. This module is powered and controlled through the RS485 port of the connected dScript module. It features a single RS485 serial port and two relays capable of handling up to 16Amp at 24VDC or 250VAC, with screw terminals for Normally Open (N/O), Normally Closed (N/C), and Common contacts. The module supports four inputs, which can be configured as either digital or analogue (0-5V, 10-bit).
Power can be supplied either from the connected dScript module via a twin pair cable or directly through screw terminals if necessary. The module is compatible with various dScript models, including dS2242, dS378, dS3484, dS2824, dS2832, and dS2408. The cable length for connection can extend up to 300 meters, depending on the quality of the cable used. Configuration is straightforward through the dSx configuration page on the dScript module, allowing the relays and inputs to function as if they were local to the module.
Note: Ensure proper handling and installation to avoid electrical hazards.
1x Devantech DSX42L - dScript Expansion Module
Serial ports: 1 x RS485 port
Relays: 2, compatible with up to 16A @ 24VDC or 250VAC, featuring screw terminals for normally open (N/O), normally closed (N/C), and common contacts
Inputs: 4, configurable as digital or analog (0-5V, 10-bit)
Power: 12V, supplied by a connected dScript module via twin pair cable or directly through screw terminals if necessary
Compatible with dScript modules: dS2242, dS378, dS3484, dS2824, dS2832, dS2408
Maximum cable length: 300 meters, dependent on cable quality
Configuration: Simplified setup through the dSx configuration page on the dScript module; post-configuration, relays and inputs function as if local
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".