12-DoF quadruped platform with Flat and RUG multi-terrain gait system
Up to 2.5 m/s; climbs 40° slopes and 15 cm steps (18 cm in AI Motion Mode); 1.5–2 h endurance
Wide-angle camera and dual ultrasonic radar (obstacle auto-stop and visual person-tracking)
AI Motion Mode with handstand, leap, and backflip actions (unlockable via activation key)
Voice command control (English/Chinese) and app control via DEEP Robotics APP (Android)
The Deep Robotics Lite3 Basic Quadruped Robot is an intelligent quadruped robot built around a 12-degree-of-freedom legged platform designed for agile, versatile locomotion. It navigates flat ground, climbs slopes up to 40 degrees, and climbs steps up to 15 cm (up to 18 cm in AI Motion Mode) drawing on a multi-gait control system that adapts to terrain in real time. Its Flat gait offers three selectable speed levels (up to 2.5 m/s), while the RUG gait family provides dedicated modes for general terrain, steep slopes, and higher obstacles. Compact, portable, and operable in 0–40 °C indoor and controlled outdoor settings, the Lite3 Basic is positioned by DEEP Robotics as an entertainment, education, and research platform — the accessible entry point to its quadruped lineup.
Perception on the Lite3 Basic is handled by a forward-facing wide-angle camera paired with dual ultrasonic radars that provide forward/rear obstacle detection with automatic stop, and autonomous visual tracking of a selected person. The robot responds to voice commands in English and Chinese, executing movement and posture instructions without manual joystick input. Connectivity is managed through a built-in Wi-Fi router and the DEEP Robotics Android application (Android 6.0+), which provides live video streaming, gait selection, and an action library including Backflip, Carpet Backflip, Hello, Twist, Moonwalk, Long Jump, Twist Jump, and Turn Over. An unlockable AI Motion Mode adds AI-driven gaits (Base and Fast) with traction control plus advanced actions such as handstand and aerial leap, making the Lite3 Basic a flexible platform for educational programs, locomotion and reinforcement-learning research, and interactive demonstrations.
Why Buy From RobotShop
Authorized Distributor
Full manufacturer-backed warranty coverage and dedicated product support
Hassle-Free Delivery
Complete end-to-end logistics management, including customs clearance
Single Point of Contact
All pre-sales and post-sales support handled by our dedicated team
Documentation & Resources
Full access to detailed technical guides and a comprehensive knowledge base
Max Speed
Up to 2.5 m/s
Battery Life
1.5-2h
Walking Load
5 kg
Range
5 km
Degrees of Freedom
12
Model Features
Mobility→
Mobility
Chip Label
Gaits: Flat (NRM / Crawl) and RUG (General, Grip, H-Step)
Max Speed: 2.5 m/s (Fast gait)
Max Slope: 40°
Step Height: 15 cm (manual gait) / 18 cm (AI Motion Mode)
Degrees of Freedom: 12
Sensing→
Sensing
Chip Label
Camera: Wide angle camera x1
Radar: Ultrasonic radar x2 (front and rear)
Smart Sensing: Autonomous person tracking + forward/rear obstacle auto-stop (detection pauses while tracking)
Control→
Control
Chip Label
App: DEEP Robotics Android app (Android 6.0+; no iOS)
Voice Control: English and Chinese commands supported
Video Stream: Live camera feed via app
Payload: Threaded mounting holes; motion may be affected at/above 5 kg (no hardware interfaces, mounted gear must be self-contained)
*5 GHz operation in the 5150–5250 MHz band is restricted to indoor use.
Use Cases & Application Scenarios
Entertainment & Demonstrations
With athletic actions (backflip, handstand, leap, moonwalk), autonomous person-following, and live app control, the Lite3 Basic doubles as a programmable robot platform for exhibitions, events, robotics clubs, and brand activations.
Research & Education
A platform for students, educators, and research labs. Used for teaching legged locomotion, balance, and motion control; for student projects and robotics coursework; and for research into gaits, reinforcement learning, and human-robot interaction. Its safe, repeatable operation suits hands-on classroom and lab experimentation.
Locomotion & Outdoor Terrain
With Grip and H-Step gaits, the Lite3 Basic handles slopes, grass, and uneven steps across indoor and controlled outdoor conditions (rated for 0–40 °C operation).
Deep Robotics Lite3 Basic Quadruped Robot
Model: Lite3-Basic
•
Jueying Lite3 Basic Robot (battery not included)
•
Replaceable Battery
•
Charger
•
Charging Base
•
Transport Case
•
Sole Kit
•
Fold-out Guide
•
Qualified Certificate
•
Warranty Card
Package contents vary by configuration. Controller is optional and not included by default.
Deep Robotics Lite3 Basic Quadruped Robot
Model: Lite3-Basic
Standing Size (L x W x H)
•
610 mm x 370 mm x 406 mm
Sitting Size (L x W x H)
•
680 mm x 370 mm x 115 mm
Weight
•
12 kg
Transport Case (L x W x H)
•
633 mm x 462 mm x 329 mm
Values shown are from the manufacturer's reference.
* Warranty: joints, legs and battery: 6 months (3 months once AI Motion Mode is unlocked); electronics: 1 year; shell and accessories not covered. Regional terms may vary.
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".