CubePilot HereLink HD Video Transmission System
Description
- Herelink HD Long Range Video Transmission & Controller System
- Features a Mainboard, a video daughterboard, and an RF daughterboard
- Offers one-button-pairing to setup the connection between air- and ground system
The Herelink HD Long Range Video Transmission & Controller System features a Mainboard + video daughterboard + RF daughterboard. The Video daughterboard is designed for bridging an HDMI signal input.
The RF daughterboard is designed for transceiver transmission RF signal. You can use the M2 (E) connector to connect the daughterboard with the main board.
- 1 x Herelink HD Long Range Video Transmission & Controller System
- 76.7 x 27 mm


- Material: Plastic
- Video: 5.46 inches, 1080P, 16 million colors LCD touchscreen
- Audio: build-in Speakerxl build-in micx2
- Remote control: Rockerx2 / wheelxl / bottom keyx6 / with back light top kevxl (right)
- Modern: BT/ WiFi / GPS 2.4G transmission around system
- Indicate light: Top tri-color light*2 (left, right)
- Interface: MicroUSBxl TFIashx1 (Supports maximum expansion capability up to 64 GB)
- Antenna: Directional antenna (4.5dBi) xl / sectional omni Antenna (2 dBi) xl sectional built-in WiFi antenna/built-in GPS antenna
- Battery: Built-in 4950 mAh hpo battery
- Charger: Support Micro USB 2 A charge
- Processor: SoC - pinecone SI AP: 4 x big cores, Cortex A53 @2.2GHz, 4 x small cores. Cortex A53(S) 1.4GH7, GPU: 4cores, Mali-T860 SDR: A7 + DSP
- Storage: LPDDR3: 2GB eMMC: 4 GB
- Transmission Range: LPDDR3: 2 GB eMMC: 4 GB
- Latency: Minimum 110 ms (from input source to ground control screen display)
- Video Resolution: 720p @30 fps 1080p (5)30 / 60 fps
- Operating Frequency: Z.40HZlbM
- Receiver Sensitivity: -99 dBm g>20 MHz BW
- Interference Recovery: <1s
- Power Consumption: Average below 4W *Only when Transmission svstem workine. medium brightness. WiFi closed. GPS closed
I haven't flown with this GCS yet, but the build is solid and it is relatively east to set up. I did have to troubleshoot my USB drivers a bit to update the firmware but it wasn't rocket science by any means. For the price, you can't find a better controller with the same level of support from the manufacturer and community
Je n'ai pas encore volé avec ce GCS, mais la construction est solide et il est relativement facile à mettre en place. J'ai dû dépanner un peu mes pilotes USB pour mettre à jour le firmware, mais ce n'était en aucun cas sorcier. Pour le prix, vous ne pouvez pas trouver un meilleur contrôleur avec le même niveau de support du fabricant et de la communauté
Robot Shop always offers quick and competent customer support. Their packing and shipping is prompt and the orders are always as expected. We use the HereLink for commercial robot operations and rely on Robot Shop to efficiently send us what we need and they never disappoint. 100% recommend.
Robot Shop offre toujours un support client rapide et compétent. Leur emballage et leur expédition sont rapides et les commandes sont toujours comme prévu. Nous utilisons HereLink pour les opérations de robots commerciaux et comptons sur Robot Shop pour nous envoyer efficacement ce dont nous avons besoin et ils ne déçoivent jamais. 100% recommande.
We have been using this Herelink for many remote-controlled devices for more than a year and it has been of great use for us. I give 4 stars because once we had to return because one didn't work properly. Robotshop were kind and repaired it for no fee.
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".
