AgiBot D1 MaxPro Quadruped Robot Dog
Description
- AgiBot D1 MaxPro Quadruped Robot Dog
- Large-format legged quadruped with 50 kg effective payload and 70 kg maximum load capacity
- IP67-rated chassis with 20 cm water depth resistance and -20°C to 55°C operating range
- 5.5-hour unloaded runtime on a 2,160 Wh battery with quick-swap and autonomous return-to-charge
- 45° slope capability, 30 cm continuous stair climb including hollow industrial stairs
- Gigabit Ethernet, USB, and multi-voltage power output (12V/24V/48V, 720W) for mission payload integration
AgiBot D1 MaxPro Quadruped Robot Dog is a large-format legged quadruped developed by AGIBOT for heavy-payload industrial handling, freight transport, and emergency response applications that demand both exceptional carrying capacity and sustained all-terrain endurance. With an effective payload of 50 kg and a maximum capacity of 70 kg, the D1 MaxPro significantly outperforms comparable legged platforms in its class in payload-to-weight ratio, making it practical for missions requiring substantial equipment loads, material logistics, or mission-critical instrumentation in environments where wheeled platforms cannot operate reliably. Its reinforcement learning motion control algorithm provides full all-terrain adaptability including flexible climbing of 30 cm continuous stairs and open hollow industrial stairs, as well as a mature fall recovery mechanism for uninterrupted operation in unpredictable environments. A 2,160 Wh battery delivers the best unloaded runtime in its class alongside guaranteed continuous output at rated payload, while quick battery removal and replacement and an adaptive autonomous charging station support truly continuous field operations.
IP67 industrial-grade protection and a wide operating temperature range allow the D1 MaxPro to operate normally in extreme cold, intense heat, wind, rain, and up to 20 cm of water depth, ensuring stable performance across the full range of harsh natural conditions encountered in real deployments. A front wide-angle binocular camera and an onboard LiDAR module provide the perception foundation for environmental detection and target recognition, while built-in autonomous patrol and environmental sensing modules enable industrial inspection and emergency response workflows with a high degree of independence from operator input. The comprehensive multi-voltage power interface supporting 12V, 24V, and 48V at up to 720W gives mission integrators broad flexibility for powering attached equipment. As an autonomous robot platform built for the most demanding payload and endurance requirements in the field, the D1 MaxPro serves industrial operators, logistics teams, and emergency response organizations that need a high-capacity legged quadruped capable of sustained, reliable performance across heavy-duty real-world deployment scenarios.
Genuine products with manufacturer-approved warranty coverage.
Customs, inspection, and prep handled locally before shipment.
Sales, support, and returns managed by one team.
Docs, tutorials, and community answers to move faster.
Payload →
Payload
Endurance →
Endurance
Performance →
Performance



Model: 410100054401
| • | D1 MaxPro Robot Dog Platform |
| • | Charger (1 pc) |
| • | Handheld Remote (1 pc) |
Package contents vary by configuration. Mission packages and accessories are provided by partner.
Model: 410100054401
| • | 1230 × 530 × 730 mm |
| • | Weight: 68 kg |
| • | 45 Ah, 48V (2,160 Wh) |
| • | Quick-release hot-swap, auto return-to-charge |
Values shown are from the manufacturer's official product page.
Model: 410100054401
Documentation
This document begins in Chinese. Scroll past the first section to find the English version.
Model: 410100054401
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".