Actuonix Linear Actuator Control Board
Description
- Actuonix Linear Actuator Control Board
- Designed for Actuonix actuators
- Controls one linear actuator
- Supported input signals include USB, Voltage, Current, RC Servo, and PWM
- Onboard adjustment of speed, sensitivity, and stroke limits
The Actuonix Linear Actuator Control Board is a stand-alone closed-loop control board specifically designed for Actuonix actuators. The LAC greatly simplifies designs by saving the development time, cost, and processor overhead associated with direct motor control. As little as one digital or analog output is required for position control.
The LAC can be operated as both an interface board, or as a stand-alone controller with the addition of an external potentiometer and power supply. Each LAC Board controls one linear actuator and will require an external power supply rated for the actuator. The LAC will work with the L12-P, PQ12-P and L16-P. It may also be able to drive other larger actuators that have position feedback.
- 1x Actuonix Linear Actuator Control Board
Ce produit est exactement ce dont j'avais besoin - permet un contrôle précis des moteurs pour la robotique
This product is just what I needed - allows precision control of motors for robotics
This is a must-purchase if you are planning to use a P-series Actuonix linear actuator (P16, L16-P, and L12-P) . It makes assembly and use much easer. The P-series actuators include a Potentiometer but do NOT have a built-in controller, and thus this component is desired/needed. Note: There are voltage power, speed, wiring, controller, and force, differences between the various Actuonix actuators. If you are not sure which one to purchase, then suggest printing out their spec sheets and carefully comparing them. My application called for the Actuonix P16 actuator with the 22:1 gear ratio that offers their fastest speed option with their longest stroke available, and runs on 1-15VDC. I plugged that actuator into the LAC board, and connected the LAC into a Pololu Mini Maestro 24, and was able to quickly prototype a simple solution using the Maestro software.
C'est un achat indispensable si vous prévoyez d'utiliser un actionneur linéaire Actuonix de série P (P16, L16-P et L12-P). Cela facilite beaucoup l'assemblage et l'utilisation. Les actionneurs de la série P incluent un potentiomètre mais ne possèdent PAS de contrôleur intégré. Ce composant est donc souhaité / nécessaire. Remarque: Il existe des différences de puissance, de vitesse, de câblage, de contrôleur et de force entre les différents actionneurs Actuonix. Si vous ne savez pas lequel acheter, suggérez alors d’imprimer leurs fiches techniques et de les comparer soigneusement. Mon application faisait appel à l'actionneur Actuonix P16 avec un rapport de transmission de 22: 1 qui offre l'option de vitesse la plus rapide avec la course la plus longue disponible et fonctionne sur 1-15VDC. J'ai branché cet actionneur sur la carte LAC et connecté le LAC à un Pololu Mini Maestro 24 et j'ai pu rapidement mettre au point une solution simple à l'aide du logiciel Maestro.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".
