3V 1.7A 68oz-in Stepper Motor
Description
- 68 oz-in bipolar stepper motor
- Step angle (degrees): 0.9
- Holding torque: 48N.cm
- NEMA 17 form factor
The 3V 1.7A 68oz-in Stepper Motor is a great way to get things moving, especially when positioning and repeatability is a concern.
PDF File
- Rated voltage: 3V
- Rated current: 1.7A/phase
- Drive shaft diameter: 5mm
- Phase: 2
Selon le pilote que vous essayez d'utiliser, il se peut que vous n'ayez pas besoin d'un angle de pas de 0,9 '. J'utilise DRV-8825 et c'est probablement une surpuissance pour moi. J'aurais pu utiliser un angle de pas de 1,8 m, mais je les ai quand même car je peux les réutiliser pour d'autres projets. Je souhaite qu'il soit livré avec un connecteur. Comme c'est le cas actuellement, les câbles sont trop longs pour mon projet et si je le coupe, je le regretterai peut-être plus tard. J'ai également commandé des supports standard NEMA 17 et ces steppers sont parfaitement adaptés. Les vis de montage doivent avoir la longueur idéale, sinon vous aurez besoin de rondelles.
As described, Fits NEMA 17 profile. Good replacement or for new builds. Drives a 8mm projector telecine very well.
Comme décrit, correspond au profil NEMA 17. Bon remplacement ou pour les nouvelles constructions. Entraîne très bien un télécinéma pour projecteur 8 mm.
A few comments on the 3V 1.7A 68oz-in Stepper Motor - RB-Spa-983 - Works great, fits perfectly into my existing Nema 17 motor mount. - You may want to consider a heat sink on your Stepper Driver as the 1.7A current required for the motor will definitely warm up your driver. - The only fault with the motor is that the shaft is not ground flat on one side.("D" shape) I should say that the documentation was not misleading I just missed that point when viewing the drawing. - Always fast delivery from Robot Shop !!
Quelques commentaires sur le moteur pas à pas 3V 1.7A 68oz-in - RB-Spa-983 - Fonctionne très bien, s’intègre parfaitement dans mon support de moteur Nema 17 existant. - Vous pouvez envisager un dissipateur de chaleur sur votre pilote pas à pas, car le courant de 1,7 A requis pour le moteur réchauffera définitivement votre pilote. - Le seul problème avec le moteur est que l’arbre n’est pas rectifié à plat sur un côté. (Forme en "D") Je dois dire que la documentation n’est pas trompeuse. - Livraison toujours rapide de Robot Shop !!
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".