30'' Stroke 400lb Force Linear Actuator
Description
- Force: 400lb
- Stroke: 30''
- Built in limit switches, not movable
- Input: 12VDC
- Speed: Approx 1/2" per sec (no load) 2/5" per sec (loaded)
The 30'' Stroke 400lb Force Linear Actuator features 400 lbs force with aluminum shaft, and a tough plastic case. It also features two wire configuration for ease of use, 12vdc operation, fixed limit switches and is very quiet. Use MB3 mounting brackets for these style actuators. This actuator may come with a custom connector. Removing the connector will expose the two wires which you can connect to your remote control unit or switch.
PDF File
- Stroke length: Standard stroke sizes 3", 6", 9", 12", 18", 24", 30"
- Mounting: Clevis on fixed end, uses MB3 brackets on both ends
- Duty cycle: 20%
- Current draw: Up to 10amps at full load
- Inner tube: Aluminum alloy
- IP Grade: IP43
- CE safety certificate
Je recherche des actionneurs linéaires de 350 mm, 30 mm / s et une force de 1600 Nm ou quelque chose de similaire à 12 ou 24 V
Using four of these to raise about 250 pound load. Synchronizing them has proven to be a challenge, especially when using the recommend speed controllers to synch them. Have broken gears on two units when uneven lifting speeds caused binding. Replacing with same actuators because the project was built around these specific linear actuators. Noticed design changes and replacing one of four has caused even more time/speed problems because of product updates. Am now forced to replace the remaining three.
I'm looking for linear actuators of 350mm, 30mm / s and a force of 1600Nm or something similar to 12 or 24v
This seems like a quality product so far, and the price is incredible, considering how big it is. It's smooth and strong. The motor shuts off when it gets to either end, which helps prevent motor burn out, which is a nice feature.
En utilisant quatre d'entre eux pour soulever une charge d'environ 250 livres. Leur synchronisation s'est avérée être un défi, surtout lorsque vous utilisez les contrôleurs de vitesse recommandés pour les synchroniser. Avoir cassé les engrenages sur deux unités lorsque des vitesses de levage inégales ont provoqué un grippage. Remplacement par les mêmes actionneurs car le projet a été construit autour de ces actionneurs linéaires spécifiques. Les modifications de conception remarquées et le remplacement de l'un des quatre ont causé encore plus de problèmes de temps / vitesse en raison des mises à jour du produit. Suis maintenant obligé de remplacer les trois autres.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".

