10 Pins Ribbon Cable (15')
Description
- Make connections without a big mess of wires
- 15ft. length of 10-wire ribbon cable
- Helpful in situations to make a lot of connections
- Makes project look more finished
The 10 Pins Ribbon Cable (15') is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
PDF File
Great product, don't cost a lot. Really fast shipping.! Amazing!
Excellent produit, ne coûte pas cher. Expédition vraiment rapide! Incroyable!
Note that this is 28 AWG wire, with a rating of about an amp, depending on temperature, unlike the more common 22 AWG sold here and elsewhere for hobby electronics, which can handle around 5-7 amps in moderate temperatures. With motors demanding great current at startup, and most motor controllers allowing at least an amp, I would only use this for sending signals like 12C signals or transistor gate driving signals. Wire resistance of 28 AWG is 5 times that of 22 AWG, so if you send this down more than the 15ft in the loop, you might have to start taking voltage drop into consideration, if your signaling is sensitive to small variance in voltage.
Notez qu’il s’agit d’un câble de calibre 28 AWG, avec un calibre d’environ un amplificateur, en fonction de la température, contrairement au 22 AWG plus courant vendu ici et ailleurs pour l’électronique grand public, qui peut supporter environ 5 à 7 ampères à des températures modérées. Avec les moteurs demandant un courant important au démarrage et la plupart des contrôleurs de moteur permettant au moins un ampli, je ne l’utiliserais que pour envoyer des signaux tels que des signaux 12C ou des signaux de commande de grille à transistor. La résistance du fil de 28 AWG est 5 fois supérieure à celle de 22 AWG. Par conséquent, si vous l'envoyez plus que 15 pieds dans la boucle, vous devrez peut-être commencer à prendre en compte la chute de tension, si votre signalisation est sensible aux faibles variations de tension.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".